Sn0wbreeze 2.5 released untethered for 4.3.1 with Multitouch gestures enabler
[color=Magenta]
iH8sn0w.com | Jailbreak your iPod touches and iPhones
A Custom IPSW Creator for 4.3.1
sn0wbreeze 2.5 supported devices list
iPhone 3G/3G[s]/4
iPod Touch 2G/3G/4
iPad
Apple TV 2
System Requirements for sn0wbreeze
Windows XP, Vista, 7 (32 or 64 bit)
.NET Framework 2.0
Its 33MB this time since the Apple TV 2 is supported.
Multitouch gestures are also enabled in this release.
Please NOTE this is NOT for iPad 2
anyone wishing to jailbreak iPad 2
MUST wait for @comex userland jailbreak
Install Guide : [HOW TO GUIDE] Sn0wbreeze 2.5 Untethered Jailbreak iOS 4.3.1 on Windows
Sn0wbreeze 2.5 can be defined as "Pwnage Tool for Windows"
because of its structure and the type of jailbreak executable program.
Developed by iH8sn0w, Sn0wbreeze performs the jailbreak of a number
of devices by creating a custom firmware to be restored at a later time, with iTunes.
Compatibility
iPhone 3G
iPhone 3Gs
iPhone 4
iPod Touch 3G
iPod Touch 4G
iPad 1st gen ONLY
Apple TV 2G
Necessary
Windows operating system (7, Vista, XP);
A device IOS (including those in the compatibility list);
Original Apple Firmware 4.3.1
Direct Download Links for iOS 4.3.1 (Official from Apple)
Sn0wbreeze 2.5 for Windows iH8sn0w.com | Jailbreak your iPod touches and iPhones
sn0wbreeze-v2.5.1.zip (37.73 MB)
1. Launch Snowbreeze 2.5 and click OK to the first message that appears.
On Windows Vista and 7 may need to run it in Administrator mode.
2. At this point the screen will show the credits.
Close this window by clicking on "Close Credits".
At this point we have to choose one of three modes available.
The first, Baseband Preservation Mode,
allows ONLY to preserve the baseband of the iPhone by the update.
3. If you are interested in the jailbreak, not only to preserve
the baseband by the update, click on Expert Mode ,
and then click Browse and find the original 4.3.1 firmware
on your device saved to your PC.
4. Select it by double clicking the left mouse button.
Sn0wbreeze verify that the firmware you entered is incorrect.
5. Once you recognize the firmware loaded the following screen appears
(you will see the model of device you want to unlock).
Now click again on the blue arrow to proceed.
6. You will be confronted with a page that will allow you to access different functions.
Click on General and uncheck the item Activate The iPhone
(if your iPhone is Italian, otherwise leave it on).
All other items are optional and serve to enable the backgrounds,
multi-tasking and the battery as a percentage of devices
that do not natively support these functions.
you can also change the system partition dedicated
to programs and install Cydia manually SSH.
7. From the next screen you can add packages and repositories
in Cydia and avoid doing it manually using the iPhone at a later time.
Finish in this case the changes, click on the blue arrow.
8. At this point we will return automatically
to the Home of Sn0wbreeze 2.5.
Then click on Build IPSW and then click Next.
The program will begin to create the custom firmware
based on parameters you set.And you will be asked
if you will like playing Pac Man while waiting or not.
Your response, however, will not influence
the creation of custom firmware.
That's it!
9. Once you are finished you have to put the iPhone into DFU Mode.
Sn0wbreeze will show you the steps to follow.
10. Now iTunes will detect an iPhone in recovery mode.
To install the new custom firmware then you have to
simultaneously press the SHIFT key on the keyboard
and press Restore in iTunes.
11. Now select the custom firmware you created earlier
and wait a few minutes so that the recovery process is completed.
Finished. Now you have your iPhone jailbroken on iOS 4.3.1 !!
sn0wbreeze 2.5 ကေတာ့ redsnow ေနာက္ကထြက္ပါတယ္။ Multitouch gestures enabler ျဖစ္လို႕ jb ျပီးရင္ ဒီ Multitouch gestures ကို enable (ဖြင့္) ေပးဖို႕ ထပ္လုပ္ေပးစရာ မလိုေတာ့ပါဘူး၊(multitouch gestures က ေလာေလာဆယ္ iPad ေတြမွာဘဲ apple ကအသုံးျပဳခြင့္ေပးထားေသးတာပါ)
အေပၚက jb လုပ္ပုံကိုဖတ္ျပီး ကိုယ္တိုင္ jb လုပ္ႏိုင္မယ္ထင္ပါတယ္၊
သက္ဆိုင္ရာ firmware (ipsw) ကို download လုပ္မယ၊္ ေနာက္ sn0wbreeze 2.5 ကို download လုပ္ရပါမယ္၊ ျပီး sn0wbreeze ကိုဖြင့္ download လုပ္ခဲ့တဲ့ firmware (ipsw) ကိုေရြးေပးရင္ sn0wbreeze ကမိမိဖုန္း firmware နဲ႕ကိုက္ညီတဲ့ jb ျပီးသား firmware ipsw ကို မိမိ computer ရဲ့ desktop ေပၚမွာေဆာက္ေပးပါမည္၊ ျပီးရင္ဖုန္းကို DFU mode ထဲဝင္ေပးရပါမယ္
DFU mode ထဲဝင္တာကို ေအာက္ကလင့္မွာလဲ ေလ့လာႏိုင္ပါတယ္
http://www.iclarified.com/entry/index.php?enid=1034
ျပီးရင္ itune ကေနတဆင့္ ေစာေစာကရလာတဲ့ firmware ipsw (desktop ေပၚမွာရွိတဲ့) file ကိုေရြးခ်ယ္ျပီး ဖုန္းကို restore လုပ္ေပးရပါမယ္
(DFU mode ထဲဝင္ျပီး restore လုပ္ရာမွာ itune က error 1600 အျဖစ္ျပပါတယ္၊ error 1600 ကိုေျဖရွင္းဖို႕ google မွာရွာလိုက္ေတာ့ iREB ကို run ေပးရမယ္လို႕ေတြ႕လိုက္တယ္၊ sn0breeze မွာလဲ iREB ကတစ္ခါတည္းပါေနေတာ့ run ေပးျပီး restore ျပန္လုပ္တာမွာ ေနာက္ထပ္ ၎ error 1600 မၾကဳံေတာ့ဘဲ အဆင္ေျပသြားပါတယ္)
ref: sinfuliphone.com
http://veryrite.com/2011/04/05/jailb...n0wbreeze-2-5/
[color=Magenta]
iH8sn0w.com | Jailbreak your iPod touches and iPhones
A Custom IPSW Creator for 4.3.1
sn0wbreeze 2.5 supported devices list
iPhone 3G/3G[s]/4
iPod Touch 2G/3G/4
iPad
Apple TV 2
System Requirements for sn0wbreeze
Windows XP, Vista, 7 (32 or 64 bit)
.NET Framework 2.0
Its 33MB this time since the Apple TV 2 is supported.
Multitouch gestures are also enabled in this release.
Please NOTE this is NOT for iPad 2
anyone wishing to jailbreak iPad 2
MUST wait for @comex userland jailbreak
Install Guide : [HOW TO GUIDE] Sn0wbreeze 2.5 Untethered Jailbreak iOS 4.3.1 on Windows
Sn0wbreeze 2.5 can be defined as "Pwnage Tool for Windows"
because of its structure and the type of jailbreak executable program.
Developed by iH8sn0w, Sn0wbreeze performs the jailbreak of a number
of devices by creating a custom firmware to be restored at a later time, with iTunes.
Compatibility
iPhone 3G
iPhone 3Gs
iPhone 4
iPod Touch 3G
iPod Touch 4G
iPad 1st gen ONLY
Apple TV 2G
Necessary
Windows operating system (7, Vista, XP);
A device IOS (including those in the compatibility list);
Original Apple Firmware 4.3.1
Direct Download Links for iOS 4.3.1 (Official from Apple)
Sn0wbreeze 2.5 for Windows iH8sn0w.com | Jailbreak your iPod touches and iPhones
sn0wbreeze-v2.5.1.zip (37.73 MB)
1. Launch Snowbreeze 2.5 and click OK to the first message that appears.
On Windows Vista and 7 may need to run it in Administrator mode.
2. At this point the screen will show the credits.
Close this window by clicking on "Close Credits".
At this point we have to choose one of three modes available.
The first, Baseband Preservation Mode,
allows ONLY to preserve the baseband of the iPhone by the update.
3. If you are interested in the jailbreak, not only to preserve
the baseband by the update, click on Expert Mode ,
and then click Browse and find the original 4.3.1 firmware
on your device saved to your PC.
4. Select it by double clicking the left mouse button.
Sn0wbreeze verify that the firmware you entered is incorrect.
5. Once you recognize the firmware loaded the following screen appears
(you will see the model of device you want to unlock).
Now click again on the blue arrow to proceed.
6. You will be confronted with a page that will allow you to access different functions.
Click on General and uncheck the item Activate The iPhone
(if your iPhone is Italian, otherwise leave it on).
All other items are optional and serve to enable the backgrounds,
multi-tasking and the battery as a percentage of devices
that do not natively support these functions.
you can also change the system partition dedicated
to programs and install Cydia manually SSH.
7. From the next screen you can add packages and repositories
in Cydia and avoid doing it manually using the iPhone at a later time.
Finish in this case the changes, click on the blue arrow.
8. At this point we will return automatically
to the Home of Sn0wbreeze 2.5.
Then click on Build IPSW and then click Next.
The program will begin to create the custom firmware
based on parameters you set.And you will be asked
if you will like playing Pac Man while waiting or not.
Your response, however, will not influence
the creation of custom firmware.
That's it!
9. Once you are finished you have to put the iPhone into DFU Mode.
Sn0wbreeze will show you the steps to follow.
10. Now iTunes will detect an iPhone in recovery mode.
To install the new custom firmware then you have to
simultaneously press the SHIFT key on the keyboard
and press Restore in iTunes.
11. Now select the custom firmware you created earlier
and wait a few minutes so that the recovery process is completed.
Finished. Now you have your iPhone jailbroken on iOS 4.3.1 !!
sn0wbreeze 2.5 ကေတာ့ redsnow ေနာက္ကထြက္ပါတယ္။ Multitouch gestures enabler ျဖစ္လို႕ jb ျပီးရင္ ဒီ Multitouch gestures ကို enable (ဖြင့္) ေပးဖို႕ ထပ္လုပ္ေပးစရာ မလိုေတာ့ပါဘူး၊(multitouch gestures က ေလာေလာဆယ္ iPad ေတြမွာဘဲ apple ကအသုံးျပဳခြင့္ေပးထားေသးတာပါ)
အေပၚက jb လုပ္ပုံကိုဖတ္ျပီး ကိုယ္တိုင္ jb လုပ္ႏိုင္မယ္ထင္ပါတယ္၊
သက္ဆိုင္ရာ firmware (ipsw) ကို download လုပ္မယ၊္ ေနာက္ sn0wbreeze 2.5 ကို download လုပ္ရပါမယ္၊ ျပီး sn0wbreeze ကိုဖြင့္ download လုပ္ခဲ့တဲ့ firmware (ipsw) ကိုေရြးေပးရင္ sn0wbreeze ကမိမိဖုန္း firmware နဲ႕ကိုက္ညီတဲ့ jb ျပီးသား firmware ipsw ကို မိမိ computer ရဲ့ desktop ေပၚမွာေဆာက္ေပးပါမည္၊ ျပီးရင္ဖုန္းကို DFU mode ထဲဝင္ေပးရပါမယ္
DFU mode ထဲဝင္တာကို ေအာက္ကလင့္မွာလဲ ေလ့လာႏိုင္ပါတယ္
http://www.iclarified.com/entry/index.php?enid=1034
ျပီးရင္ itune ကေနတဆင့္ ေစာေစာကရလာတဲ့ firmware ipsw (desktop ေပၚမွာရွိတဲ့) file ကိုေရြးခ်ယ္ျပီး ဖုန္းကို restore လုပ္ေပးရပါမယ္
(DFU mode ထဲဝင္ျပီး restore လုပ္ရာမွာ itune က error 1600 အျဖစ္ျပပါတယ္၊ error 1600 ကိုေျဖရွင္းဖို႕ google မွာရွာလိုက္ေတာ့ iREB ကို run ေပးရမယ္လို႕ေတြ႕လိုက္တယ္၊ sn0breeze မွာလဲ iREB ကတစ္ခါတည္းပါေနေတာ့ run ေပးျပီး restore ျပန္လုပ္တာမွာ ေနာက္ထပ္ ၎ error 1600 မၾကဳံေတာ့ဘဲ အဆင္ေျပသြားပါတယ္)
ref: sinfuliphone.com
http://veryrite.com/2011/04/05/jailb...n0wbreeze-2-5/
No comments:
Post a Comment